Faq

It’s a transition between the two. Red Deer gets some chinook influence but also experiences sustained cold periods closer to what Edmonton sees. The base engineering needs to handle both – fast drainage for chinook cycling and adequate depth for sustained frost. We design Red Deer bases for the combined pattern rather than treating it as one or the other.

Yes. Central Alberta’s agricultural clay is expansive – it swells when wet and contracts when it dries or freezes. We assess clay conditions at each Red Deer site and engineer the sub-base to separate the surface from clay movement below.

Often, yes. Red Deer functions as a hub for central Alberta communities, and many sports clubs and schools here draw participants from surrounding towns. We design sports surfaces for the expected usage level, which is typically higher than a purely local facility would require.

Yes. We work with Red Deer Public Schools and Red Deer Catholic Regional Schools on playground surfacing and sports field construction, designing to CSA Z614 for playgrounds and governing body specifications for sports fields.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit and assess the conditions for your specific project.

Yes. Medicine Hat is the sunniest city in Canada, with over 2,500 hours of annual sunshine. We select UV-stabilised turf fibres and infill materials rated for that level of exposure. Products that perform well in cloudier cities may fade, become brittle, or retain excessive heat in Medicine Hat’s conditions.

It’s one of the best practical options. Medicine Hat’s hot, dry summers make natural grass expensive to maintain, and irrigation restrictions limit how much water you can use. Synthetic turf eliminates irrigation entirely and provides a consistent surface year-round regardless of precipitation.

Yes. Medicine Hat is at the eastern edge of the chinook belt and still experiences winter temperature cycling, and the soil is clay-based. Freeze-thaw base engineering is still required – the drier climate doesn’t eliminate the need for proper drainage and frost protection in the sub-base.

Yes. As southeastern Alberta’s largest city, Medicine Hat’s sports facilities and schools draw participants from surrounding communities. We design surfaces for the expected regional usage level.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit and assess the conditions for your specific project.

Yes. Lethbridge is one of the windiest cities in Canada, and sustained high winds can lift improperly anchored turf edges, migrate lightweight infill, and create uneven snow load patterns around fencing. We specify anchoring systems and infill weights appropriate for Lethbridge’s wind conditions, and we consider wind patterns when placing fencing and infrastructure around fields and courts.

The Oldman River valley and coulee system create elevation changes that most Alberta cities don’t have. Sites near coulee edges need slope assessment, drainage routing that follows the terrain, and retaining solutions where needed. It’s more similar to hillside work on the BC coast than to typical prairie construction.

Yes. Lethbridge is in the chinook belt and experiences the same rapid temperature swings. The base engineering for freeze-thaw protection is similar to Calgary’s, with additional consideration for Lethbridge’s wind exposure and terrain variation.

Yes. We work with educational institutions in Lethbridge on turf, sports field, playground, and commercial landscaping projects, designing to the relevant specifications and standards.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit and assess the wind, terrain, and soil conditions for your project.

Calgary gets chinook cycling – rapid, repeated freeze-thaw events. Edmonton gets deep, sustained cold with frost penetrating significantly deeper into the ground. The base engineering is different: Calgary bases focus on fast drainage to keep up with chinook cycling; Edmonton bases need deeper aggregate profiles for frost protection and drainage capacity for high-volume spring snowmelt. Both cities have expansive clay, but the climate demands on the base are distinct.

Yes. We install dedicated dog run turf with non-toxic backing, drainable systems, and infill materials selected for pet safety. The drainage design handles pet waste and rinse water, and the turf is easy to clean and maintain.

Splash pad surfacing is slip-resistant, drainable rubber applied to the surface of water play areas. It needs to handle constant water exposure, provide adequate grip when wet, and drain quickly enough that water doesn’t pool. We install splash pad surfaces for Edmonton parks and recreation facilities.

Yes. We supply turf, shock pad, infill, and related materials to Edmonton-based landscaping contractors at contractor pricing.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit, assess the frost depth and clay conditions, and outline the base design and surfacing options for your project.

They damage the base beneath them if it’s not designed for it. Chinooks can cycle temperatures by 30°C in hours, repeatedly freezing and thawing water trapped in the sub-base. Over a couple of Calgary winters, that causes visible heave and settlement at the surface. We design Calgary bases with drainage that removes water from the aggregate before the next freeze event, which is what prevents this damage.

Yes. We install non-toxic turf systems with drainage designed to handle pet use. The turf drains urine and rinse water through the backing, and we specify infill materials that are safe for pets. We’ve seen increasing demand for pet-friendly turf in Calgary’s residential market, particularly from homeowners who want a low-maintenance yard that stays clean and usable year-round.

It affects both. Even a residential backyard installation in Calgary needs a sub-base that accounts for clay movement. The scale is different – a backyard installation is less complex than a full sports field – but the engineering principle is the same: separate the surface from the clay below it.

Yes. We provide maintenance services for Calgary turf installations, including infill top-up, seam inspection and repair, debris clearing, and seasonal care. Regular maintenance extends the life of the surface and keeps it performing as intended.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit, assess the clay and drainage conditions, and outline the base design and surfacing options for your project.

Chinooks can swing temperatures by 30°C or more in a matter of hours. That rapid cycling freezes and thaws water in the sub-base far more frequently than a standard seasonal freeze-thaw. A base designed for one deep freeze and one spring thaw will underperform in chinook country. We engineer southern Alberta bases with drainage layers that remove water from the base quickly enough to prevent repeated freeze-expansion damage.

Yes. Edmonton has deeper frost penetration and a longer sustained cold period than Calgary. Calgary’s challenge is rapid, repeated chinook cycling; Edmonton’s is deep, sustained frost. Both require careful base engineering, but the aggregate profiles and drainage configurations differ between the two cities.

Yes, significantly. Most of settled Alberta sits on expansive clay that swells when saturated and contracts when it dries or freezes. We assess clay conditions at each site and use sub-base designs that separate the surface from clay movement below.

CSA Z614 governs playground surfaces across Canada, including Alberta. We design pour-in-place rubber and EPDM systems to the required fall-height specifications and provide full compliance documentation for every playground project.

Yes. We supply bulk turf, shock pad, and infill to Alberta-based landscapers, installers, and municipalities at contractor pricing, by pallet or project quantity.

CSA Z614, the standard that applies to public-use playground equipment and surfacing right across Canada, Victoria included. We design our pour-in-place rubber and EPDM systems around the applicable fall-height and surfacing requirements, and provide project documentation wherever it’s needed.

It can. Properties close to the shoreline tend to see more salt spray, wind, and moisture than inland sites, and we factor that in when selecting surface materials and supporting components. That said, the right specification still comes down to the individual property.

Often, yes. Victoria’s milder winters tend to open up more scheduling flexibility than colder parts of BC, though installation still depends on ground conditions, rainfall, temperature, and the requirements of the specific surface system.

Yes, we do. We install residential turf throughout Greater Victoria, assessing each property individually, including drainage, access, slope, existing landscaping, and how the finished area will actually be used.

We do. Our playground surfacing contractor Canada-wide experience covers school, municipal, daycare, and community projects, and we handle site preparation, drainage, surfacing, and finishing as required, selecting systems around the project specifications and applicable CSA requirements.

Cold temperatures, snowmelt, and freeze-thaw cycles can really stress a poorly drained or inadequately prepared base. That’s why we assess the property first, then select the aggregate profile, drainage approach, and separation layers, so the system is designed for the actual site rather than a generic northern-BC template.

It can. Colder weather, snow cover, and spring thaw all limit when certain excavation, base, and surfacing work is practical, so we discuss the construction window early and adjust scheduling around site and weather conditions.

Yes, as long as the turf system and base are selected and installed for the site. Product specifications, drainage, base preparation, and intended winter use all play a role. Snow gets managed according to the turf manufacturer’s maintenance guidance, and the surface returns to regular use once conditions allow.

We do. As a sports field construction company Canada-wide, we build sports fields, courts, and playground surfaces for schools, municipalities, clubs, and community facilities, with every Prince George project designed around its specific site conditions and applicable requirements.

Reach out through the contact page or request a design consultation. We’ll talk through the project scope and timing, then arrange a site visit to assess access, drainage, ground conditions, and surface requirements.

They vary a lot. In parts of southern Manitoba, Lake Agassiz left extensive clay and silt deposits that can respond to changes in moisture and freezing conditions. So rather than assuming every property has the same soil profile, we assess each site before finalizing the aggregate, drainage, and separation-layer approach.

Frost depth and freeze-thaw behavior depend on location, exposure, soil type, and moisture, and all of that varies site to site. That’s why we design the sub-base and drainage system around the specific property, so water is less likely to get trapped beneath the finished surface when temperatures drop.

It can, especially on sites with limited natural grade. We look at elevations, runoff, and available drainage outlets, then design the base to move water away efficiently. Spring thaw is a real factor, but the right drainage approach still comes down to the individual property, not a province-wide template.

CSA Z614:20 (R2025), the current Canadian standard for public-use playground equipment and surfacing. We design playground systems around the applicable fall-height and surfacing requirements, and provide project documentation where it’s needed.

We can. As an artificial turf distributor Canada-wide, we supply wholesale turf, shock pad, and infill for contractor and project orders. And as a playground surfacing contractor Canada-wide, we can coordinate those supplied materials with broader surfacing, civil, and installation scopes when needed.

Surface temperature is a real consideration in Kamloops’s dry, sunny summers, and synthetic turf can get warmer than natural grass in direct sun. That’s why we talk through turf and infill options, expected use, and available shade during design, so the surface fits the site. For high-use sports surfaces and children’s areas, we review those factors specifically during the site visit.

It can. Freezing temperatures and seasonal swings put real stress on a poorly drained base. That’s why we design the aggregate profile and drainage for the specific site, to manage water effectively and cut down the risk of frost-related movement.

Yes, we do. Surface Suppliers works with schools, municipalities, sports clubs, and developers on playground surfacing and sports facility projects. For Kamloops school projects specifically, we can manage the full scope, from site preparation and drainage through surfacing, lighting, fencing, and finishing, with playground systems designed around applicable CSA Z614 requirements.

It does. Ground conditions can shift quite a bit across Kamloops depending on the property, its grading history, and the surrounding terrain. So we assess soil and drainage conditions at each site before finalizing the sub-base and installation approach.

Reach out through the contact page or request a design consultation, and we’ll arrange a site visit and walk you through the options for your Kamloops project.

Yes, but it requires more design work than a flat installation. We assess the slope, determine where drainage needs to discharge, integrate retaining walls where needed, and anchor the turf correctly for the grade. The drainage and base are designed for the slope, not just for the turf layer on top.

Yes. Salt air and coastal humidity affect some turf fibre types and infill materials more than inland conditions. For White Rock properties – particularly those on the lower hillside – we specify materials rated for coastal exposure to ensure the surface ages well over time.

Yes. Many White Rock residential projects combine turf with retaining walls, steps, and hardscaping. We handle all of it under one project scope rather than requiring separate contractors for each element.

It depends on the specific grade and site conditions. Very steep grades may require terracing – creating level areas between retaining walls – rather than turf on the slope itself. We assess each property individually and walk through the options during the site visit.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit and assess the slope, drainage, and surface requirements specific to your property.

Yes. We specify systems rated for the building’s structural load and confirmed compatible with the waterproofing membrane. We also coordinate with building management on access and scheduling, which matters on high-rise projects where equipment access is limited.

On constrained sites, combined tennis/pickleball layouts that share one court footprint with separate line markings are often the most practical solution. Where space allows, dedicated pickleball courts give better playing geometry. We assess the site and recommend the right configuration based on the available dimensions.

Yes. We supply wholesale turf, shock pad, and infill to Vancouver-based landscapers and installers at contractor pricing. Orders are available by pallet or project quantity.

We engineer the drainage layer based on the site’s specific rainfall exposure, slope, and soil type rather than applying a standard profile. A correctly designed sub-base for a Vancouver sports field can drain fast enough to keep the surface playable even during sustained rain events.

It can. Richmond’s flat delta setting and relatively high water table make drainage a central part of site planning here. So instead of assuming the same profile works everywhere, we assess the conditions at each property before finalizing the sub-base and drainage design.

Yes, significantly. In large parts of Richmond, the water table is close enough to the surface that a standard drainage profile won’t perform the way it would in a higher-elevation city. We assess the water table and soil conditions at each site before finalising the drainage design – the sub-base profile for a Richmond installation is typically different from one we’d use in Surrey or Burnaby.

Because Richmond’s topography is so flat, drainage often comes down to carefully planned grades, aggregate layers, and suitable outlets rather than natural slope alone. The exact approach depends on the site, so we design the base and drainage system around existing elevations and local conditions.

Yes, we do. We build sports fields and multi-sport courts for schools, recreation facilities, clubs, and municipal settings, with every Richmond project designed around the specific site conditions, including drainage, base preparation, and intended level of use.

We do. We install pour-in-place rubber and CSA-compliant playground surfaces for school, park, and community settings, and our playground surfacing contractor Canada-wide experience covers site preparation, surfacing, and project documentation based on the applicable requirements.

Reach out through the contact page or request a design consultation, and we’ll arrange a site visit to assess the drainage, sub-base, and surface requirements for your Richmond project.

Yes. Where a club or school district requires certification, we build to the relevant governing body specification – FIFA, World Rugby, CFL, or NCAA as applicable. We manage the base engineering, drainage, turf system, and finishing to meet the required standard.

Yes. We handle the complete build – civil work, drainage, base construction, turf or court surface, fencing, lighting, and scoreboards – under a single contract. For a club build, that means one point of contact and one project timeline rather than coordinating separate trades.

Yes. Some areas of the Township have firm, well-draining ground. Areas closer to the Fraser River lowlands have heavier clay content that requires more careful drainage design. We assess soil conditions at each site before finalising the sub-base approach.

Yes. We’ve worked on sports field and playground surfacing for Langley School District facilities, designing to the specifications and standards required for each project.

Request a design and consultation or contact us directly through the contact page. We’ll arrange a site visit and outline the options for your specific project.

We install golf-specific synthetic turf systems with directional nap control and integrated drainage. You can choose a flat practice surface or a custom contoured green with elevation changes, fringe turf, chipping zones, and multiple pin positions. We assess the site, design the layout, and handle civil work, drainage, and surfacing under one project. The result plays similarly to a real putting green and doesn’t require irrigation, mowing, or aeration.

It can, depending on the product specified. We select turf fibres and infill materials rated for Kelowna’s UV intensity and summer temperatures. For sports surfaces, we also consider infill options that manage heat retention – some infill systems stay cooler than others in direct sun. This is part of the product selection discussion during the design consultation.

It can affect the base if it’s not engineered for it. Kelowna’s shoulder seasons bring freeze-thaw cycling that can heave a poorly designed sub-base. We engineer the base for Kelowna’s specific temperature range and drainage conditions – the same care we apply in colder prairie cities, adapted for the Okanagan’s climate.

Yes. We build standalone pickleball courts and combined tennis/pickleball setups for residential properties, clubs, and recreation facilities in Kelowna. Pickleball has a strong and growing presence in the Okanagan, and we’ve handled a range of court sizes and configurations here.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit and walk through the options for your specific project and property.

Yes, particularly in Ladner and parts of Tsawwassen. We assess soil conditions and water table depth before finalising the drainage design for those areas. Sites with clay-heavy or peat-influenced soil profiles require a more carefully engineered sub-base than a standard Lower Mainland installation – if drainage is under-engineered here, the surface will reflect that within a few seasons.

In higher-elevation areas, natural slope helps water exit the sub-base. In Delta’s low-lying areas, there’s minimal natural runoff gradient, so the drainage layer has to be designed to move water horizontally to a discharge point rather than simply relying on downward percolation. We engineer for that constraint on every Delta sports field project.

Yes. We handle playground surfacing and sports field construction for Delta school district facilities, designing to CSA Z614 for playgrounds and to governing body specifications for sports fields.

Yes. We work across North Delta, Ladner, and Tsawwassen. Each area has different terrain and soil conditions, and we assess each site individually rather than applying the same base design across all of Delta.

Contact us through the contact page or request a design and consultation. We’ll arrange a site visit and assess the drainage and surface requirements specific to your location within Delta.

It really comes down to the specific site. Chilliwack projects need to account for heavy rainfall, runoff from surrounding uplands, existing grades, soil conditions, and available stormwater infrastructure, and we assess all of that before finalizing the sub-base and drainage system.

We design around the expected level and type of use. A field hosting regular league play or multiple user groups usually needs a more robust base, drainage system, and surface specification than a lower-use facility, so the design starts with the project’s actual requirements rather than a one-size-fits-all standard.

We do. We build playground surfacing, sports fields, and multi-sport areas for school and institutional projects, including systems designed to meet applicable CSA Z614 requirements, and we can manage civil work, drainage, base construction, surfacing, and related site infrastructure all under one contract.

Yes, we do. Chilliwack is part of our Fraser Valley service area, and we support projects in surrounding communities as well as elsewhere in British Columbia and across Canada.

Reach out through the contact page or request a design consultation, and we’ll arrange a site visit to assess the surface, drainage, and site requirements for your project.

They can. Soil conditions vary across Abbotsford, including clay-rich soils in parts of the city, and lower-permeability soil often needs a different drainage and sub-base approach than soil that drains freely. That’s why we assess each site individually before finalizing the base, grading, and drainage design.

We do. We build playground surfacing, sports fields, and multi-sport facilities for school projects, designing playground systems to applicable CSA Z614 requirements and sports surfaces to the relevant governing-body specifications. And because we manage the full scope in-house, it’s easier to hit tight school construction schedules.

Absolutely. We handle complete builds under one contract: civil work, drainage, base construction, turf or court surfacing, fencing, lighting, scoreboards. For clubs and recreation organizations, that single point of accountability often matters as much as the technical spec itself.

We do. Our work covers Abbotsford and the surrounding Fraser Valley communities, with projects ranging from residential turf to school, municipal, commercial, and sports facilities.

Request a design consultation or reach out through our contact page, and we’ll set up a site visit and walk you through the options for your project.

We do. We work with strata corporations and property management companies on rooftop amenity decks, courtyard surfaces, podium-level turf, and ground-level common areas, and we’re well versed in the access, drainage, and structural load considerations that come with high-rise and mid-rise strata projects.

Often, yes. Synthetic turf works well for a lot of strata common areas because it needs relatively little routine maintenance: no mowing, no irrigation, and a consistent look year-round. In the right applications, that can meaningfully reduce ongoing grounds maintenance compared with natural grass.

We do. We build playground surfacing for school and institutional sites, including pour-in-place rubber and other systems designed to meet applicable CSA Z614 requirements, and we can provide whatever compliance documentation the project requires.

We can. We build tennis, pickleball, basketball, and multi-sport courts for municipal, school, club, and recreation projects, managing civil work, base construction, surfacing, and finishing all under one contract.

Reach out through the contact page or request a design consultation, and we’ll arrange a site visit to assess the requirements for your Burnaby project.

Yes. Our crew hub and operations centre are in Surrey, so we can typically arrange site visits within a few business days and mobilize faster for Surrey projects than anywhere else in BC.

Yes. We’ve worked on playground surfacing for Surrey School District facilities, designing pour-in-place rubber and CSA-compliant turf systems to meet the fall-height requirements of each piece of playground equipment. We provide full CSA Z614 documentation.

Yes. Civil groundwork – excavation, grading, drainage, and sub-base preparation – is part of our in-house scope. We handle it as part of a complete surface build or as a standalone groundwork contract.

Sloped lots need more than just turf laid over the grade. We integrate drainage channels routed to discharge properly, retaining walls where needed, and anchor detailing appropriate for the slope. On South Surrey properties with significant grade change, we typically design the turf alongside the hardscaping as one system.

Yes. We work regularly with strata corporations and property management companies across Surrey on common area turf projects, including ground-level landscaping, courtyard surfaces, and amenity spaces.

Rainfall in the Lower Mainland is heavy enough that a standard sub-base profile won’t drain fast enough to keep a surface performing well. We engineer drainage layers based on each site’s slope, soil type, and rainfall exposure. The goal is to move water through the base quickly enough that the surface stays firm and usable even during multi-day rain events.

Yes, significantly. Interior projects need to account for freeze-thaw cycling through the sub-base, which means different aggregate profiles compared to Lower Mainland work. Northern BC adds even deeper frost requirements. We adjust the base design for each region rather than applying a single provincial standard.

We serve the full province. Our Surrey base covers Metro Vancouver and the Fraser Valley quickly, and we travel regularly to the Okanagan, Vancouver Island, and Northern BC for project work.

CSA Z614 governs playground surfaces across Canada, including BC. It sets fall-height protection requirements based on equipment height. We design pour-in-place rubber and EPDM systems to those requirements and provide compliance documentation for every playground project.

Yes. We supply bulk turf, shock pad, and infill to BC-based landscapers, installers, and municipalities at contractor pricing, by pallet or project quantity.

We are a full-service sports, commercial, and residential landscape contractor offering design, excavation, drainage, and surfacing nationwide across Canada.

Yes, we manage the entire project from start to finish, including heavy excavation, retaining walls, sub-base preparation, and advanced drainage systems.

Absolutely. All of our turf, rubber, and court surfaces are non-toxic, highly durable, pet-friendly, and fully meet CSA safety standards.

Yes, our bases and surfaces are engineered for the Canadian climate, allowing natural snowmelt and preventing cracking or shifting during winter.

Very little. Our engineered surfaces eliminate mowing, weeding, and frequent resurfacing, requiring only occasional debris clearing or a quick rinse.

While all outdoor materials absorb heat, our high-grade surfaces dissipate heat effectively and can be cooled instantly with a quick water spray.

We build everything from professional multi-sport fields (soccer, football) to community pickleball, basketball, and tennis courts, complete with fencing and lighting.

Yes, we scale to any project size – from premium residential backyard transformations to massive municipal parks and commercial developments.

Safety is our top priority. Our playground turf and rubber surfacing are specifically designed to absorb the impact of falls. We follow strict safety standards (like CSA) to make sure your play area is as soft and protective as possible.

Definitely! We specialize in “Multi-Sport” courts. We can design a single surface with different colored lines so you can switch from basketball to pickleball or volleyball without needing a whole new court.

While the initial cost is higher than sod, most people find it pays for itself in a few years. You’ll save significantly on water bills, lawn mower gas, fertilizers, and – most importantly – your own time.

Not if it’s installed correctly. We take great care in “base preparation.” This means we build a drainage system under the turf that allows water to soak through much faster than natural soil would, keeping your yard puddle-free.

Yes, they do. We build fields that meet the requirements for FIFA (soccer), World Rugby, and the NCAA. Whether it’s a community park or a university stadium, we bring professional-level quality to every project.

It depends on the size of the project, but a standard residential backyard usually takes about 2 to 4 days. Larger sports fields or commercial projects take longer, and we’ll give you a clear timeline before we start.

Yes! We are a one-stop shop. We can handle the “civil work” (getting the ground ready), the fencing, and even professional sports lighting so you can keep the game going after the sun goes down.

With just a little bit of care, our high-quality turf and rubber surfaces typically last between 15 to 20 years. They are built to be tough and stand up to years of heavy foot traffic and play.

We’d love for you to! We offer product samples and spec sheets so you can feel the quality and see the colors in your own space before making a commitment. Just reach out to us to request a sample.

We aren’t just landscapers; we are specialists in technical outdoor surfaces. We understand the engineering behind drainage, safety standards, and high-performance athletics, ensuring your project is built to last, not just look good for a season.